Final High-Lustre Polishing for Composite Restorations

EZ Smile Water-Activated Pre-Impregnated Felt Polishing Discs are designed for the final high-lustre or super-polishing stage of direct and indirect composite restorations. The polishing medium is incorporated into each felt disc, helping produce a smooth, glossy surface without a separate polishing paste.

Key Features

• For direct and indirect composite restorations
• Water-activated, pre-impregnated felt discs
• No separate polishing paste required
• Designed for final high-lustre and super-polishing
• Snap-on system for convenient disc replacement
• Includes 50 disposable felt discs and 1 RA snap-on mandrel

Recommended Use

1. Complete contouring, finishing and scratch removal with suitable finishing instruments before using the felt disc.
2. Attach a fresh felt disc securely to the RA snap-on mandrel.
3. Moisten the disc with water immediately before use.
4. Polish at 8,000–12,000 RPM using very light, intermittent pressure to avoid excessive heat.
5. Discard the felt disc after use.

Important: This product is intended for final polishing only. It is not a coarse finishing instrument and is not designed to remove deep scratches or significant surface irregularities. Each felt disc is disposable and must not be presented or used as a reusable polishing disc. Reprocess the RA mandrel only according to the applicable validated cleaning and sterilization instructions.

Package Contents

• 50 pre-impregnated snap-on felt polishing discs
• 1 RA snap-on mandrel